Sansfer. Move your media with confidence.

Move your media with confidence. Sansfer is a Mac app that copies camera cards to every drive you choose, reads each copy back and proves it matches the original. Built for DITs, filmmakers and photographers.

Apple silicon and Intel · macOS 14 or later · Works offline

Cards are only read.

Sansfer never erases, formats, moves or changes source media. Not even in automatic workflows.

Every copy is read back.

Written, flushed to the drive, read again independently and compared with the source checksum.

Nothing is overwritten.

Existing files are confirmed and skipped, renamed, or left alone. Two cards never share a folder.

Read once. Write everywhere. Check everything.

The card is read a single time, however many drives you copy to. Every copy is then read back from the drive itself and compared with the source, before the file is moved into place.

  • SHA-256 for maximum integrity, or XXH64 when speed matters
  • A checksum manifest on every drive, checkable with shasum -c
  • A failed file is never put in place and never called verified

Free the card sooner.

Fill your fastest drive first and verify it. Hand the card back to the camera team, then let Sansfer make the backups from that verified copy, checked against the card's original checksums.

Card reading finished Primary verified All destinations verified

Parallel and sequential modes are there too, for drives that are equally fast or shouldn't be written at once.

Pulled cable. Flat battery. It picks up where it stopped.

Every verified file is recorded the moment it lands. After a crash, a power cut or a disconnected drive, the transfer waits for you on the next launch.

  • Drives are recognised by volume ID; a different drive with the same name is refused
  • Verified files are checked again, then skipped; half-written files start over
  • Tested by killing the app in the middle of real transfers

Six stages, every file, every drive.

  1. 1

    Read once

    The card is read a single time.

  2. 2

    Write to staging

    Data lands in a temporary file, never on top of anything.

  3. 3

    Flush

    The drive commits the data, its own cache included.

  4. 4

    Read back

    The copy is read again, independently of what was written.

  5. 5

    Compare

    Size and checksum must match the source.

  6. 6

    Move into place

    Only now is the file finalised, never over an existing one.

What a checksum can't promise

Verification proves each copy matched the card when it was checked. It can't protect against a drive that fails later or damage that was already on the card. So Sansfer warns when two copies share one physical disk and reminds you to keep backups on independent drives.

Everything between the camera and the edit.

Read-back verification

Every copy on every drive is read again and compared with the card before it counts.

Crash recovery

Resume after a crash, power cut or pulled cable. Verified files are kept and re-checked.

Preflight checks

Free space, FAT32 limits, copying into the card, name clashes. Start only lights up when it's safe.

Independent drives

A warning when two destinations sit on the same volume or physical disk.

Projects

Client, shooting day, camera and card numbers in one place, with history and totals per project.

Folder templates

Variables such as {project}, {shootingDay}, {cameraLetter} and {cardNumber}, with a live preview.

Same card, different card

A card that was already offloaded is recognised. A different card never lands in an occupied folder.

Camera recognition

Sony, Canon, Panasonic, Blackmagic, RED, ARRI, DJI, GoPro and Fujifilm card structures, kept intact.

Presets

Folder structure, drives, mode, checksum and reports in one click. Import and export them for your team.

Automatic card workflows

Opt-in: a matching card is prepared or started by itself, only after every check passes.

Three transfer modes

Parallel, cascading and sequential, so every drive mix gets the right order.

PDF, CSV and JSON

Saved automatically next to the footage on every drive, never overwritten.

History

Search every transfer by project, card, drive, date or result, and reopen the details.

Manifests

A checksum manifest per card folder that anyone can check without Sansfer.

Private by design

No account, no cloud, no tracking. Everything works offline and stays on your Mac.

A report you can hand to production.

The result is the first thing on the page: Verified, Incomplete or Cancelled. Below it, the project, the drives and the checksum of every file.

  • Saved automatically in the card or project folder on every drive
  • Project, operator, camera and card number on every page
  • Failed files listed with the reason, per drive
VERIFIEDEvery file was copied, read back and matched the source checksum at both destinations.
Documentary · Day 03 · CAM B · CARD 007Cascading · XXH64Example
PathSizeSource checksumResult
CLIPS001/A001C001_261116.MXF262.1 MB12c4c75324e7ac06Verified (2/2)
CLIPS001/A001C002_261116.MXF262.1 MB3b8f1982b3b820c5Verified (2/2)
CLIPS001/A001C003_261116.MXF262.1 MBb5b02ffb79d371a6Verified (2/2)
CLIPS001/A001C004_261116.MXF262.1 MB7d2eb780c93cfa2dVerified (2/2)
CLIPS001/A001C005_261116.MXF262.1 MB9f601154811510fbVerified (2/2)
24 files · 3.15 GB · 0:06Sansfer · Page 1 of 2

One app, four very different days.

Each comes with a ready-made preset you can make your own.

Documentary

Day, camera and card in every folder name, and a PDF report in the project folder.

Preset: Documentary production

Weddings

Client and date first, fast XXH64 verification and two backups before you leave the venue.

Preset: Wedding production

Multi-camera

Camera letters and card numbers keep A, B and C apart, card after card.

Preset: Multi-camera production

Photography

Only stills and their sidecars, raw formats included, sorted by year and date.

Preset: Photography import

What DITs say about Sansfer.

Placeholder: add 2 or 3 real quotes from beta testers, with their permission, name, role and photo.

Quote from a beta tester about the moment Sansfer saved a shoot, or about trusting the verified status.

Name · DIT

Quote about cascading freeing up cards faster on a busy shoot day.

Name · Camera assistant

Quote about reports, projects or presets saving time in post.

Name · Editor

Try every feature. Buy when you're sure.

Placeholder: prices and license terms are still to be decided.

Evaluation

Free

  • Every feature included
  • Unlimited cards and drives
  • Works offline, no account
Download coming soon

Sansfer Pro

€ — price to be announced

  • A personal license key, checked offline
  • Multiple seats for a team
  • A license problem never stops a transfer
Available at launch

The specifications.

Verification
SHA-256 or XXH64, with an independent read-back of every copy
Modes
Parallel, cascading and sequential
Cameras
Sony, Canon, Panasonic, Blackmagic, RED, ARRI, DJI, GoPro, Fujifilm and generic cards
Storage
Tested on APFS, HFS+, exFAT and FAT32. RAID and NAS volumes are handled like any other drive.
Reports
PDF, CSV, JSON and a checksum manifest on every drive
Requirements
macOS 14 Sonoma or later, Apple silicon or Intel
Privacy
Works offline. Media, file names and history stay on your Mac.
Testing
Over 100 automated tests, including real crashes, full and ejected drives and files beyond 4 GB

Questions people ask.

Does Sansfer erase or format my cards?

Never. Sansfer only reads source media. When every destination is verified it tells you so, and clearing the card stays your decision, made in your camera.

Do I need an internet connection?

No. Copying, verification, reports and licensing all work offline. Nothing about your media is sent anywhere.

What happens if my Mac crashes mid-transfer?

On the next launch Sansfer offers to resume. It recognises the drives by their volume ID, re-checks what was already verified and copies only what's missing.

SHA-256 or XXH64?

Both catch corrupted copies. SHA-256 is cryptographic and the default. XXH64 is much faster to calculate and reliably catches accidental damage, which helps on very fast RAIDs.

Which cameras does Sansfer recognise?

Sony, Canon, Panasonic, Blackmagic Design, RED, ARRI, DJI, GoPro and Fujifilm card structures. Any other card or folder works too and is copied with its full structure.

Where does the name come from?

Sansfer is short for safe transfer: take the "fe Tra" out of Safe Transfer. A transfer only counts as safe once every copy has been read back and checked.

What does the logo mean?

It is a single route. It starts at the card, the open ring, and ends at the drive, the filled dot. Nothing drops off along the way.

Does Sansfer support ASC MHL?

Not yet. Today every drive gets Sansfer's own checksum manifest and a .sha256 or .xxh64 list. ASC MHL is on the roadmap and will only be announced once it's tested against the specification.

Your next card deserves a safe transfer.

Sansfer is being tested on real productions now. The signed public download follows soon.

Download coming soon

Version 0.4 · Universal · macOS 14 or later · about 5 MB